Buildings in Chicago
312-384-0044
About Building Pressure Washing in Chicago
Building pressure washing in Chicago is all about beautifying your surroundings and making your property stand out.
As we all know, eventually, we all have to maintain our building’s exterior surfaces and depending on the surfaces protect them from weathering elements.
In truth, in many instances, this is not something you notice that often. For instance, you see your commercial or residential building every day. You just don’t notice they build up of carbon, dirt, mold, and mildew until you do.
Is it too late? has irreversible damage already happened? Chances are probably not. However, it makes good sense to get an evaluation as soon as possible, because certain elements can damage your building’s surfaces.
In Chicago, we have a lot of brick, block, split face block, limestone, and other hard materials. Sometimes mixed in with some siding.
Most of these surfaces are made to withstand quite a bit. Nevertheless, again you should call a building pressure washing professional.
My name is Douglas Simons and I have been pressure-washing buildings since 1988. In truth, I would have to say over a thousand. I am very familiar with the types of pollution found in the Chicago area and the types of surfaces.
As well as what you as a building owner are looking for when going to spend money on what is probably one of your if not your largest investments you have ever made.
Above all, if you are in need of building pressure washing in Chicago and need answers please call 312-384-0044 or use the contact form on the contact page.
In the next section we will go into depth about the types of pollutants can can contaminate your building in Chicago.
Types Of Contamination On Chicago Buildings
To begin with, there are really only two different types of pollutants found in Chicago buildings.
The first is atmospheric pollution. Atmospheric pollution is you guessed it all of the carbon from planes, trains, buses, cars, lawnmowers Etc. The carbon is in the air in Chicago, It settles then either stick to the surfaces or washes down to a lower surface and sticks there.
This by far is the hardest of the two to remove. It normally stick to harder surfaces like brick, block, limestone and so forth. In many instances, a restoration cleaner is needed to loosen the carbon free fro the surface. In truth, pressure washing alone will not even make a difference. Fornutely there are ways to clean this from your building quicvkly and safely with no damage to your buildings surface.
The second pollutant that can contaminate your buildings surface is Biological pollution. In truth, it sounds so much worse than it is. Biological pollution is basically just regular old mold and mildew. This by far is the easiest to remove from your buildings surface. However, left unattended, it can do some real seious damage to mortar joints among other areas.
This pollution can be seen most of the time of course on the North side and East sides. However if you are seeing it there believe it or not it most likely can be found on your entire building.
Fornutely there are ways to clean this from your building quickly and safely with no damage to your buildings surface.
What’s Next?
In truth, get in touch with us by calling, texting or emailing us. At that time we will get you and your buildings information and get you a quote tailered for your building and what you want performed there. Upon acceptance of our bid, you will be receiving our insurance and a time that works for you for us to complete the work. If a demonstration is desired we can do that also.
